CFMOTO Canada
 



Your selection:


New search
  • Other products that match your search



Back to results

ELKA Stage 4 High-Performance UTV Shock Absorbers

The Stage 4 model is derived directly from our top-end Stage 5 model, with which it shares most of the same components. It features a single external compression adjustment knob that controls the low-speed compression damping that is combined with an internal high-speed blow-off circuit which relieves peak pressure upon impacts to achieve race-level performance in a package that is more accessible and easier to adjust.

STAGE 4 // BENEFITS

  • Helps increase and maintain speed over rough terrain and bumps
  • Reduce excessive weight transfers such as body roll, diving and squatting
  • Prevents bottoming-out upon harsh square-edged impacts and potholes
  • Provides increased traction in all conditions for maximum maneuvrability
  • Allows good control of key parameters without too much complexity

 

STAGE 4 // AVAILABLE CONFIGURATIONS

  • Front shocks, 36mm or 46mm, sold as a pair
  • Rear shocks, 36mm or 46mm, sold as a pair

 

THREADED SPRING PRELOAD

Lets the rider fine-tune the initial force applied on the springs and precisely balance the weight distribution across the front and rear wheels while setting up the ride height (ground or chassis clearance) and to lower or raise the vehicle to adapt to various situations or to suit your personal preference.

To use, turn the preload adjustment ring clockwise (from top of the shock) to increase preload and raise the vehicle or turn counter-clockwise to reduce preload and lower the vehicle.

REBOUND DAMPING

Controls the speed at which the shock absorber returns to its fully extended position after being compressed from an impact, keeping the wheels on the ground for maximum traction and reducing the bucking effect caused by the spring pressure pushing back after an impact.

To use, turn the adjuster clockwise to slow down the rebound or turn counter-clockwise to speed up the rebound.

LOW-SPEED COMPRESSION

Allows fine-tuning of the damping resistance when the shock is being compressed slowly. This adjustment controls body roll when cornering, rear-end squatting under hard acceleration, front-end diving when braking, riding over whoops at moderate speed, undulations and elevation changes in the terrain.

To use, turn the red knob clockwise to increase damping resistance, therefore making the suspension stiffer or turn counter-clockwise to reduce damping resistance, therefore making the suspension softer.

STAGE 4 // TECHNICAL FEATURES

  • HIGH-FLOW TECHNOLOGY
  • ULTRA-LIGHTWEIGHT DESIGN
  • LOW-FRICTION INTERNALS
  • INTERNAL HIGH-SPEED BLOW-OFF CIRCUIT
  • HARD-ANODIZED PARTS
  • TRIPLE SEALING SYSTEM
  • PROPRIETARY OIL BLEND

Product code: SEE CHART / VOIR CHARTE

Follow us :